Translation Source string Target string
Linux From Scratch 12.1/chapter09_networkd — Chinese (Simplified Han script)
If using methods incompatible with systemd-resolved to configure your network interfaces (ex: ppp, etc.), or if using any type of local resolver (ex: bind, dnsmasq, unbound, etc.), or any other software that generates an <filename>/etc/resolv.conf</filename> (ex: a <command>resolvconf</command> program other than the one provided by systemd), the <command>systemd-resolved</command> service should not be used.
如果使用其他方式配置网络接口 (例如 ppp 或 network-manager 等)，或使用了某种本地解析器 (如 bind，dnsmasq，或者 unbound 等)，或其他任何生成 <filename>/etc/resolv.conf</filename> 的软件 (如 resolvconf)，则不应使用 <command>systemd-resolved</command> 服务。
Linux From Scratch 12.1/chapter06_gcc-pass2 — Chinese (Simplified Han script)
Compile the package:
编译该软件包：
Linux From Scratch 12.1/chapter01_whatsnew — Chinese (Simplified Han script)
OpenSSL-&openssl-version;
Openssl-&openssl-version;
Linux From Scratch 12.1/part3intro_toolchaintechnotes — Chinese (Simplified Han script)
Rebuild and test ccC using ccC on machine C.
在机器 C 上，用 ccC 重新构建它本身，并测试
Linux From Scratch 12.1/chapter08_gmp — Chinese (Simplified Han script)
Installed directory
安装的目录
Linux From Scratch 12.1/chapter08_texinfo — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_util-linux — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_glibc — English
Generally a few tests do not pass. The test failures listed below are usually safe to ignore.
Generally a few tests do not pass. The test failures listed below are usually safe to ignore.
Linux From Scratch 12.1/chapter08_glibc — Chinese (Simplified Han script)
Generally a few tests do not pass. The test failures listed below are usually safe to ignore.
通常来说，可能会有极少数测试不能通过，下面列出的失败结果一般可以安全地忽略。执行以下命令进行测试：
Linux From Scratch 12.1/chapter08_bzip2 — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_openssl — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_inetutils — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_shadow — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter09_network — English
Decide on a fully-qualified domain name (FQDN), and possible aliases for use in the <filename>/etc/hosts</filename> file. If using static IP addresses, you'll also need to decide on an IP address. The syntax for a hosts file entry is:
Decide on a fully-qualified domain name (FQDN), and possible aliases for use in the <filename>/etc/hosts</filename> file. If using static IP addresses, you'll also need to decide on an IP address. The syntax for a hosts file entry is:
Linux From Scratch 12.1/chapter09_network — Chinese (Simplified Han script)
Decide on a fully-qualified domain name (FQDN), and possible aliases for use in the <filename>/etc/hosts</filename> file. If using static IP addresses, you'll also need to decide on an IP address. The syntax for a hosts file entry is:
选择一个全限定域名 (FQDN) 和可能的别名，以供 <filename>/etc/hosts</filename> 文件使用。如果使用静态 IP 地址，您还需要确定要使用的 IP 地址。hosts 文件条目的语法是：
Linux From Scratch 12.1/chapter06_gcc-pass2 — Chinese (Simplified Han script)
<userinput remap="make">make</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter08_glibc — Chinese (Simplified Han script)
<userinput remap="test">make check</userinput>
<userinput remap="test">make check</userinput>
Linux From Scratch 12.1/chapter08_tcl — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_dbus — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_ncurses — Chinese (Simplified Han script)
<userinput remap="install">ln -sfv libncursesw.so /usr/lib/libcurses.so</userinput>
<userinput remap="install">ln -sfv ../../lib/$(readlink /usr/lib/libncursesw.so) /usr/lib/libncursesw.so</userinput>
Linux From Scratch 12.1/chapter08_bzip2 — Chinese (Simplified Han script)
Installed libraries
安装的库
Linux From Scratch 12.1/chapter08_shadow — Chinese (Simplified Han script)
<userinput remap="install">make exec_prefix=/usr install
make -C man install-man</userinput>
<userinput remap="install">make install</userinput>
Linux From Scratch 12.1/chapter09_locale — Chinese (Simplified Han script)
Please note that the <command>localectl</command> command doesn't work in the chroot environment. It can only be used after the LFS system is booted with systemd.
请注意 <command>localectl</command> 只能在使用 systemd 引导的系统中使用。
Linux From Scratch 12.1/chapter06_gcc-pass2 — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter06_ncurses — Chinese (Simplified Han script)
Compile the package:
编译该软件包：
Linux From Scratch 12.1/chapter05_binutils-pass1 — Chinese (Simplified Han script)
<userinput remap="make">make</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter01_whatsnew — Chinese (Simplified Han script)
Pkgconf-&pkgconf-version;
File-&file-version;
Linux From Scratch 12.1/chapter08_udev — Chinese (Simplified Han script)
Install the package:
 
Linux From Scratch 12.1/chapter08_grub — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_tcl — Chinese (Simplified Han script)
Installed library
安装的库
Linux From Scratch 12.1/chapter08_perl — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_readline — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_bash — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_binutils — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter08_bzip2 — Chinese (Simplified Han script)
Installed directory
安装的目录
Linux From Scratch 12.1/chapter08_python — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_gawk — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_automake — English
A tool for automatically generating <filename>Makefile.in</filename> files from <filename>Makefile.am</filename> files [To create all the <filename>Makefile.in</filename> files for a package, run this program in the top-level directory. By scanning the <filename>configure.in</filename> file, it automatically finds each appropriate <filename>Makefile.am</filename> file and generates the corresponding <filename>Makefile.in</filename> file.]
A tool for automatically generating <filename>Makefile.in</filename> files from <filename>Makefile.am</filename> files [To create all the <filename>Makefile.in</filename> files for a package, run this program in the top-level directory. By scanning the <filename>configure.in</filename> file, it automatically finds each appropriate <filename>Makefile.am</filename> file and generates the corresponding <filename>Makefile.in</filename> file.]
Linux From Scratch 12.1/chapter08_kbd — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter09_udev — Chinese (Simplified Han script)
Note that the <quote>softdep</quote> command also allows <literal>pre:</literal> dependencies, or a mixture of both <literal>pre:</literal> and <literal>post:</literal> dependencies. See the <ulink role='man' url='&man;modprobe.d.5'>modprobe.d(5)</ulink> manual page for more information on <quote>softdep</quote> syntax and capabilities.
注意<quote>softdep</quote>命令也允许 <literal>pre:</literal> 依赖项，或混合使用 <literal>pre:</literal> 和 <literal>post:</literal> 依赖项。参阅 <filename>modprobe.d(5)</filename> man 手册页面，了解更多关于<quote>softdep</quote>语法和功能的信息。
Linux From Scratch 12.1/chapter09_network — Chinese (Simplified Han script)
Unless the computer is to be visible to the Internet (i.e., there is a registered domain and a valid block of assigned IP addresses&mdash;most users do not have this), make sure that the IP address is in the private network IP address range. Valid ranges are:
除非该计算机可以从 Internet 访问 (即拥有一个注册域名，并分配了一个有效的 IP 地址段 —— 多数用户没有分配有效 IP)，则使用的 IP 地址必须属于私网 IP 范围。有效的范围是：
Linux From Scratch 12.1/chapter09_locale — Chinese (Simplified Han script)
The <literal>C</literal> (default) and <literal>en_US</literal> (the recommended one for United States English users) locales are different. <literal>C</literal> uses the US-ASCII 7-bit character set, and treats bytes with the high bit set as invalid characters. That's why, e.g., the <command>ls</command> command substitutes them with question marks in that locale. Also, an attempt to send mail with such characters from Mutt or Pine results in non-RFC-conforming messages being sent (the charset in the outgoing mail is indicated as <computeroutput>unknown 8-bit</computeroutput>). It's suggested that you use the <literal>C</literal> locale only if you are certain that you will never need 8-bit characters.
<quote>C</quote> (默认 locale) 和<quote>en_US</quote>(推荐美式英语用户使用的 locale) 是不同的。<quote>C</quote> locale 使用 US-ASCII 7 位字符集，并且将最高位为 1 的字节视为无效字符。因此，<command>ls</command> 等命令会将它们替换为问号。另外，如果试图用 Mutt 或 Pine 发送包含这些字符的邮件，会发出不符合 RFC 标准的消息 (发出邮件的字符集会被标为<quote>未知 8 位</quote>)。因此，您只能在确信自己永远不会使用 8 位字符时才能使用<quote>C</quote> locale。
Linux From Scratch 12.1/chapter06_gcc-pass2 — Chinese (Simplified Han script)
<userinput remap="install">make DESTDIR=$LFS install</userinput>
<userinput remap="install">make DESTDIR=$LFS install</userinput>
Linux From Scratch 12.1/chapter06_ncurses — Chinese (Simplified Han script)
<userinput remap="make">make</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter05_binutils-pass1 — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter08_autoconf — Chinese (Simplified Han script)
Automatically runs <command>autoconf</command>, <command>autoheader</command>, <command>aclocal</command>, <command>automake</command>, <command>gettextize</command>, and <command>libtoolize</command> in the correct order to save time when changes are made to <command>autoconf</command> and <command>automake</command> template files
在 <command>autoconf</command> 和 <command>automake</command> 模板文件发生变化时，按照正确顺序自动运行 <command>autoconf</command>、<command>autoheader</command>、<command>aclocal</command>、<command>automake</command>、<command>gettextize</command>, 以及 <command>libtoolize</command>，以便节省时间。
Linux From Scratch 12.1/chapter08_gmp — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_texinfo — English
Used to read info pages which are similar to man pages, but often go much deeper than just explaining all the available command line options [For example, compare <command>man bison</command> and <command>info bison</command>.]
Used to read info pages which are similar to man pages, but often go much deeper than just explaining all the available command line options [For example, compare <command>man bison</command> and <command>info bison</command>.]
Linux From Scratch 12.1/chapter08_ncurses — English
<userinput remap="install">cp -v -R doc -T /usr/share/doc/ncurses-&ncurses-version;</userinput>
<userinput remap="install">cp -v -R doc -T /usr/share/doc/ncurses-&ncurses-version;</userinput>
Linux From Scratch 12.1/chapter08_ncurses — Chinese (Simplified Han script)
<userinput remap="install">cp -v -R doc -T /usr/share/doc/ncurses-&ncurses-version;</userinput>
<userinput remap="install">mkdir -v /usr/share/doc/ncurses-&ncurses-version;
cp -v -R doc/* /usr/share/doc/ncurses-&ncurses-version;</userinput>
Linux From Scratch 12.1/chapter08_python — Chinese (Simplified Han script)
Installed library
安装的库
Linux From Scratch 12.1/chapter08_openssl — English
is a <application>Perl</application> script that scans all files in a directory and adds symbolic links to their hash values. Use of <command>c_rehash</command> is considered obsolete and should be replaced by <command>openssl rehash</command> command
is a <application>Perl</application> script that scans all files in a directory and adds symbolic links to their hash values. Use of <command>c_rehash</command> is considered obsolete and should be replaced by <command>openssl rehash</command> command
Linux From Scratch 12.1/chapter08_openssl — Chinese (Simplified Han script)
is a <application>Perl</application> script that scans all files in a directory and adds symbolic links to their hash values. Use of <command>c_rehash</command> is considered obsolete and should be replaced by <command>openssl rehash</command> command
一个 <application>Perl</application> 脚本，扫描一个目录中的所有文件，并添加它们的符号链接，符号链接名为对应文件的散列值。
Linux From Scratch 12.1/chapter09_network — Chinese (Simplified Han script)
<literal>Private Network Address Range Normal Prefix
10.0.0.1 - 10.255.255.254 8
172.x.0.1 - 172.x.255.254 16
192.168.y.1 - 192.168.y.254 24</literal>
<literal>私网地址范围 公共前缀长度
10.0.0.1 - 10.255.255.254 8
172.x.0.1 - 172.x.255.254 16
192.168.y.1 - 192.168.y.254 24</literal>
Linux From Scratch 12.1/chapter06_ncurses — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter05_glibc — Chinese (Simplified Han script)
There have been reports that this package may fail when building as a <quote>parallel make.</quote> If that occurs, rerun the make command with the <option>-j1</option> option.
有报告称该软件包在并行构建时可能失败，如果发生了这种情况，加上 "-j1" 选项重新执行 make 命令。
Linux From Scratch 12.1/chapter05_binutils-pass1 — Chinese (Simplified Han script)
<userinput remap="install">make install</userinput>
<userinput remap="install">make install</userinput>
Linux From Scratch 12.1/chapter08_python — Chinese (Simplified Han script)
Installed directories
安装的目录
Linux From Scratch 12.1/chapter06_ncurses — Chinese (Simplified Han script)
<userinput remap="install">make DESTDIR=$LFS TIC_PATH=$(pwd)/build/progs/tic install
ln -sv libncursesw.so $LFS/usr/lib/libncurses.so
sed -e 's/^#if.*XOPEN.*$/#if 1/' \
-i $LFS/usr/include/curses.h</userinput>
<userinput remap="install">make DESTDIR=$LFS TIC_PATH=$(pwd)/build/progs/tic install
echo "INPUT(-lncursesw)" > $LFS/usr/lib/libncurses.so</userinput>
Linux From Scratch 12.1/chapter05_glibc — Chinese (Simplified Han script)
Compile the package:
编译该软件包：
Linux From Scratch 12.1/chapter05_binutils-pass1 — English
Details on this package are located in <xref linkend="contents-binutils" role="."/>
Details on this package are located in <xref linkend="contents-binutils" role="."/>
Linux From Scratch 12.1/chapter05_binutils-pass1 — Chinese (Simplified Han script)
Details on this package are located in <xref linkend="contents-binutils" role="."/>
这个软件包的细节在<xref linkend="contents-binutils"/>中可以找到。
Linux From Scratch 12.1/chapter01_whatsnew — Chinese (Simplified Han script)
Setuptools-&setuptools-version;
Binutils-&binutils-version;
Linux From Scratch 12.1/chapter04_settingenviron — Chinese (Simplified Han script)
<userinput>cat &gt;&gt; ~/.bashrc &lt;&lt; "EOF"
<literal>export MAKEFLAGS=-j<replaceable>$(nproc)</replaceable></literal>
EOF</userinput>
<userinput>cat &gt; ~/.bash_profile &lt;&lt; "EOF"
<literal>exec env -i HOME=$HOME TERM=$TERM PS1='\u:\w\$ ' /bin/bash</literal>
EOF</userinput>
Linux From Scratch 12.1/chapter08_glibc — Chinese (Simplified Han script)
<userinput>grep "Timed out" -l $(find -name \*.out)</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter08_grub — Chinese (Simplified Han script)
Is a helper program for <command>grub-install</command>
grub-install 使用的辅助程序
Linux From Scratch 12.1/chapter08_tcl — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_coreutils — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter08_bash — Chinese (Simplified Han script)
A widely-used command interpreter; it performs many types of expansions and substitutions on a given command line before executing it, thus making this interpreter a powerful tool
一个广泛使用的命令解释器；它在执行命令前对命令行进行多种展开和替换操作，这些操作使得它成为强大的工具。
Linux From Scratch 12.1/chapter08_vim — Chinese (Simplified Han script)
By default, vim only installs spell-checking files for the English language. To install spell-checking files for your preferred language, copy the <filename class='extension'>.spl</filename> and optionally, the <filename class='extension'>.sug</filename> files for your language and character encoding from <filename class='directory'>runtime/spell</filename> into <filename class='directory'> /usr/share/&vim-docdir;/spell/</filename>.
默认情况下 Vim 只安装英语拼写检查文件。如果希望安装您使用的语言的拼写检查文件，需要获取使用于您的语言和字符编码的 <filename>*.spl</filename> 和可选的 <filename>*.sug</filename> 文件，从 <ulink url="ftp://ftp.vim.org/pub/vim/runtime/spell/"/> 下载它们，并保存到 <filename class='directory'>/usr/share/&vim-docdir;/spell/</filename>。
Linux From Scratch 12.1/chapter06_gcc-pass2 — English
Details on this package are located in <xref linkend="contents-gcc" role="."/>
Details on this package are located in <xref linkend="contents-gcc" role="."/>
Linux From Scratch 12.1/chapter06_gcc-pass2 — Chinese (Simplified Han script)
Details on this package are located in <xref linkend="contents-gcc" role="."/>
关于本软件包的更多信息可以在<xref linkend="contents-gcc"/>中找到。
Linux From Scratch 12.1/chapter05_glibc — Chinese (Simplified Han script)
<userinput remap="make">make</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter08_udev — Chinese (Simplified Han script)
Install the man pages:
 
Linux From Scratch 12.1/chapter08_coreutils — Chinese (Simplified Han script)
<userinput remap="install">make install</userinput>
<userinput remap="install">make install</userinput>
Linux From Scratch 12.1/chapter08_e2fsprogs — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_bzip2 — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter08_openssl — English
is a command-line tool for using the various cryptography functions of <application>OpenSSL</application>'s crypto library from the shell. It can be used for various functions which are documented in <ulink role='man' url='&man;openssl.1'>openssl(1)</ulink>
is a command-line tool for using the various cryptography functions of <application>OpenSSL</application>'s crypto library from the shell. It can be used for various functions which are documented in <ulink role='man' url='&man;openssl.1'>openssl(1)</ulink>
Linux From Scratch 12.1/chapter08_openssl — Chinese (Simplified Han script)
is a command-line tool for using the various cryptography functions of <application>OpenSSL</application>'s crypto library from the shell. It can be used for various functions which are documented in <ulink role='man' url='&man;openssl.1'>openssl(1)</ulink>
一个命令行工具，用于从 shell 使用 <application>OpenSSL</application>的密码学库的一些密码学函数。它可以被用于 <command>man 1 openssl</command>描述的许多功能。
Linux From Scratch 12.1/chapter05_glibc — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/chapter05_gcc-pass1 — Chinese (Simplified Han script)
<userinput remap="make">make</userinput>
<userinput remap="make">make</userinput>
Linux From Scratch 12.1/chapter04_settingenviron — Chinese (Simplified Han script)
Finally, to ensure the environment is fully prepared for building the temporary tools, force the <command>bash</command> shell to read the new user profile:
最后，为了完全准备好编译临时工具的环境，指示 shell 读取刚才创建的配置文件：
Linux From Scratch 12.1/chapter08_e2fsprogs — Chinese (Simplified Han script)
Installed libraries
安装的库
Linux From Scratch 12.1/chapter08_ncurses — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_binutils — Chinese (Simplified Han script)
Installed programs
安装的程序
Linux From Scratch 12.1/chapter08_systemd — Chinese (Simplified Han script)
<parameter>-Ddev-kvm-mode=0660</parameter>
<parameter>-Dldconfig=false</parameter>
Linux From Scratch 12.1/chapter05_gcc-pass1 — Chinese (Simplified Han script)
Install the package:
安装该软件包：
Linux From Scratch 12.1/part3intro_toolchaintechnotes — English
In order to fake a cross-compilation in LFS, the name of the host triplet is slightly adjusted by changing the &quot;vendor&quot; field in the <envar>LFS_TGT</envar> variable so it says &quot;lfs&quot;. We also use the <parameter>--with-sysroot</parameter> option when building the cross-linker and cross-compiler, to tell them where to find the needed host files. This ensures that none of the other programs built in <xref linkend="chapter-temporary-tools"/> can link to libraries on the build machine. Only two stages are mandatory, plus one more for tests.
In order to fake a cross-compilation in LFS, the name of the host triplet is slightly adjusted by changing the &quot;vendor&quot; field in the <envar>LFS_TGT</envar> variable so it says &quot;lfs&quot;. We also use the <parameter>--with-sysroot</parameter> option when building the cross-linker and cross-compiler, to tell them where to find the needed host files. This ensures that none of the other programs built in <xref linkend="chapter-temporary-tools"/> can link to libraries on the build machine. Only two stages are mandatory, plus one more for tests.
Linux From Scratch 12.1/part3intro_toolchaintechnotes — Chinese (Simplified Han script)
In order to fake a cross-compilation in LFS, the name of the host triplet is slightly adjusted by changing the &quot;vendor&quot; field in the <envar>LFS_TGT</envar> variable so it says &quot;lfs&quot;. We also use the <parameter>--with-sysroot</parameter> option when building the cross-linker and cross-compiler, to tell them where to find the needed host files. This ensures that none of the other programs built in <xref linkend="chapter-temporary-tools"/> can link to libraries on the build machine. Only two stages are mandatory, plus one more for tests.
为了将本机伪装成交叉编译目标机器，我们在 <envar>LFS_TGT</envar> 变量中，对宿主系统三元组的 &quot;vendor&quot; 域进行修改。我们还会在构建交叉链接器和交叉编译器时使用 <parameter>--with-sysroot</parameter> 选项，指定查找所需的 host 系统文件的位置。这保证在<xref linkend="chapter-temporary-tools"/>中的其他程序在构建时不会链接到宿主 (build) 系统的库。前两个阶段是必要的，第三个阶段可以用于测试：
Linux From Scratch 12.1/chapter08_gcc — Chinese (Simplified Han script)
Install the package:
编译该软件包：
Linux From Scratch 12.1/chapter08_readline — Chinese (Simplified Han script)
Provides a set of commands for manipulating text entered in an interactive session of a program
提供一组在程序的交互会话中操纵输入的文本的命令。
Linux From Scratch 12.1/chapter08_coreutils — Chinese (Simplified Han script)
<userinput remap="install">mv -v /usr/bin/chroot /usr/sbin
mv -v /usr/share/man/man1/chroot.1 /usr/share/man/man8/chroot.8
sed -i 's/"1"/"8"/' /usr/share/man/man8/chroot.8</userinput>
<userinput remap="install">mv -v /usr/bin/{cat,chgrp,chmod,chown,cp,date,dd,df,echo} /bin
mv -v /usr/bin/{false,ln,ls,mkdir,mknod,mv,pwd,rm} /bin
mv -v /usr/bin/{rmdir,stty,sync,true,uname} /bin
mv -v /usr/bin/chroot /usr/sbin
mv -v /usr/share/man/man1/chroot.1 /usr/share/man/man8/chroot.8
sed -i 's/"1"/"8"/' /usr/share/man/man8/chroot.8</userinput>
Linux From Scratch 12.1/chapter08_e2fsprogs — Chinese (Simplified Han script)
Installed directories
安装的目录
Linux From Scratch 12.1/chapter08_ncurses — Chinese (Simplified Han script)
Installed libraries
安装的库
Linux From Scratch 12.1/chapter08_binutils — Chinese (Simplified Han script)
Installed libraries
安装的库
Linux From Scratch 12.1/chapter08_python — Chinese (Simplified Han script)
Short Descriptions
简要描述
Linux From Scratch 12.1/chapter05_glibc — Chinese (Simplified Han script)
<userinput remap="install">make DESTDIR=$LFS install</userinput>
<userinput remap="install">make DESTDIR=$LFS install</userinput>
Linux From Scratch 12.1/chapter05_gcc-pass1 — Chinese (Simplified Han script)
<userinput remap="install">make install</userinput>
<userinput remap="install">make install</userinput>
Linux From Scratch 12.1/chapter08_autoconf — Chinese (Simplified Han script)
Modifies a <filename>configure.in</filename> file that still calls <command>autoconf</command> macros by their old names to use the current macro names
修改 <filename>configure.in</filename> 文件，将其中过时的 <command>autoconf</command> 宏名改为新的宏名。
Linux From Scratch 12.1/chapter08_gcc — Chinese (Simplified Han script)
<userinput remap="install">make install</userinput>
<userinput remap="make">make</userinput>